Introduction

This troubleshooting guide addresses the issue of tape wrapping around the front application roller. If you encounter this problem, follow the solutions provided below to resolve the issue and ensure smooth operation of the front application.

Probable Causes and Corrective Actions

Detailed Steps:

1. Inspect the Clutch:

   • Examine the front application clutch for any signs of damage or failure.

2. Replacement of Damaged Parts:

   • If the clutch is identified as the cause, replace any damaged components inside the clutch mechanism.
   • Parts for Front Roller-
     1. AC231300 Roller, Rubber Front 2” or 3” AC331300
     2. 9510283 Washer, D21Xd10X2 (Metal)
     3. 9510303 Spring, Front Roller
     4. 9510294 Washer, D21Xd10X2MM
     5. 10179 Shaft, Front Roller 2” or 3” 10179-0
     6. NT00496 Screw, Flat Socket HD M5x10

Note: Ensure replacement parts are compatible with the specific model of the front application.

Additional Tips:

• Regularly check and maintain the front application clutch to prevent future occurrences of tape wrapping around the roller.
• Follow manufacturer guidelines for proper replacement procedures.

By following these troubleshooting steps, you can effectively address the issue of tape wrapping around the front application roller.