Q: What is the Box to Roller Timer? A: The Box to Roller Timer is a timer that starts when the box leaves the entry photo eye of the sealing area (trailing edge of the box at sealing area entry photo eye).

Q: How should the Box to Roller Timer be set? A: The timer value should be configured to expire when the tapehead rear rollers are almost ready to wipe the rear end of the box.

Q: What is the purpose of the Wipe Timer? A: The Wipe Timer determines the amount of time the sealing area motor stops after the Box to Roller Timer expires.

Q: Why is the Wipe Timer important? A: Even though the motor stop signal is engaged, the box may continue to move in the sealing area due to its inertia. The slow speed of the box during this period ensures a perfect wipe of the tape at the trailing edge, ensuring proper and tight rear tape seal.

Q: How do I adjust the Box to Roller Timer and Wipe Timer? A: The adjustment of these timers is typically performed through the machine's HMI interface. 

Q: What if the rear tape seal is not proper or tight? A: If the rear tape seal is not satisfactory, consider adjusting the Box to Roller Timer and Wipe Timer values to optimize the sealing process. Additionally, ensure that the Tapehead is properly maintained and calibrated for optimal performance.

By understanding and adjusting the Box to Roller Timer and Wipe Timer settings appropriately, you can ensure efficient and effective sealing of boxes in your packaging process.