Introduction
In the realm of ELVS case erectors, tape monitoring stands as a vital component to uphold efficient packaging processes. This article delves into the realm of tape monitoring, addressing common challenges that can arise and offering practical solutions to effectively overcome them.
Disabling Tape Monitoring from the PLC:
For scenarios where tape monitoring needs to be disabled, follow these steps:
-
Accessing PLC Settings:
- Open the cabinet to locate the PLC unit.
-
PLC Menu Navigation:
- Hold down the 'ESC' button on the PLC until the main menu displaying I/O status appears.
-
Adjusting Parameters:
- Navigate to 'Monitoring' using the down arrow and press 'OK'.
- Set 'File Num?' to '013' using the arrow keys and confirm with 'OK'.
- Change 'Data Type:' to 'N' and confirm with 'OK'.
- Modify the first line to 'N13:1' and press 'OK'.
- Adjust the second line to '=+00000' and confirm with 'OK'.
-
Exiting and Restarting:
- Press 'ESC' until the main menu displaying I/O status reappears.
- Move the pointer to 'User Display' using the down arrow and press 'OK'.
- Close the machine cabinet securely.
-
Machine Restart:
- Proceed to the machine control panel and perform the following steps:
- Press the 'E-stop', then release and reset it.
- Start the machine.
- Proceed to the machine control panel and perform the following steps:
-
Confirmation:
- The tape monitoring feature is now disabled.
To maintain optimal tape monitoring performance in ELVS case erectors, uphold regular maintenance routines, perform sensor calibrations, and conduct thorough inspections. This proactive approach ensures the smooth operation of tape monitoring, contributing to streamlined packaging processes and enhanced productivity.
Comments
0 comments
Article is closed for comments.