Overview
The continuous feed hopper (C-Feed Hopper V2) on ELVS machines is not shown in all manuals. This article lists the part numbers for the hopper area and its springs.
Step 1 — Check Your Hopper Spring Type
Look at the spring on your hopper. If it uses a wire cable, the replacement spring with metal cable is required. If it uses a nylon cord, a retrofit kit is available that fits without machine modifications.
Step 2 — Find the Part Number
| Part Number | Description | Notes |
|---|---|---|
CW266000P | Assembly, magazine area (C-Feed Hopper V2) | Complete hopper area |
CX345000 | Spring, compression | |
2740469 | Spring, extension with metal cable, SB-3000 | For hoppers with a wire cable |
11C0032BP | Kit, retrofit magazine area (C-Feed Hopper V2) | For hoppers with a nylon cord; no machine modifications |
2740461 | Tensioner, spring HSB-2 | Review with BestPack engineering before ordering |
⚠️ Always confirm the correct part number with BestPack before you order. Provide your machine
serial number and model when requesting pricing and availability so BestPack can confirm the correct parts for your machine.
Request Pricing and Place Your Order
- Email
partsquotes@bestpack.comwith the part numbers, quantities, and your machinemodelandserial number. BestPack replies with pricing and availability. - Send your purchase order to
orders@bestpack.comand reference the quote.
Common Mistakes
| Mistake | Result | Fix |
|---|---|---|
| Ordering a spring without checking cable or cord type | Wrong spring | Check wire cable vs nylon cord first |
| Ordering a hopper spring by description only | Wrong part ordered | Order by part number and confirm it with BestPack first |
| Requesting a quote without the model and serial number | Delay while the correct part is confirmed | Include both in your email to partsquotes@bestpack.com |
Comments
0 comments
Article is closed for comments.